Topology Example :
1. Basic settings on NWA1121-NI
In Configuration -> Network -> LAN -> IP, change the IP Address to 192.168.1.3, set the Gateway IP address and Primary DNS server in order for time sync.
In Maintenance > Time > Time, enable NTP client update and select the NTP server you prefer or enter IP address of an NTP server.
2. Modify the Security and SSID profile.
Set Security mode to WPA2-PSK and set the pre-shared key to 12345678.
In Configuration >Wireless LAN > SSID, modify the Profile1.
Set SSID to 1121 and select SecProfile1.
3. Change operation mode for Repeater AP.
In Configuration > Network > Wireless LAN > Wireless Settings, change operation mode to Repeater. Select profile1 for Universal Repeater SSID Profile and assign Root MAC address for this Repeater.
4. Change operation mode for Root AP
Take another AP, beside the IP Address, follow the task 1.1 to task 1.3 to complete the basic settings and profile modification.
Step 5: Verify the WDS link.
Verification on Root AP
In Monitor > Log > View Log, check the connect log.
In Monitor > Association List, check the connection status.
In Dashboard, verify the WLAN connection status.