How to configure VLAN group on VMG

This guide shows how to Configure VLAN Group on VMG devices. Here is an example of VMG8924-B10D, FW V5.13(ABGQ.3)C0. On the following steps, you learn how to set up a VLAN group and how to modify it

1. Build a VLAN group

2. Build an interface group

3. Modify DHCP range

Step-by-Step Guide 

Step 1: Build a VLAN group

Navigate to GUI > Network Setting > Vlan Group, click Add New Vlan Group

1-1 Create a group name

1-2 Input the VLAN ID you need

1-3 Click the LAN you want to use, the TX tagging means when download traffic goes the direction from CPE to LAN client, it will have a VLAN tag. If your device is VLAN aware and needs to have VLAN tagged, please have the tagging option-click

1-4 Click OK to finish this step.

This is the created VLAN Group.

Step 2: Build an Interface group.

Go to GUI > Network Setting > Interface Grouping, click Add New Interface Group

2-1 Input Group Name

2-2 indicates a WAN interface for this group will use

2-3 For LAN client, now click LAN4, please scroll down to choose "+Add."

2-4 It is VLAN group condition to be selected in this group, not LAN port number. Thus we set group criteria here, not select LAN 4 port.

Configure result

Step 3: Modify DHCP range

Go to GUI > Network Setting > Home Networking, Add New Interface Group

3-1 Now you can see there has been created a new group and you can modify the LAN host and DHCP Pool range to your needs.

KB-00286