Use the RESET button on NAS Series

There are two different ways to reset your NAS.

First RESET:

Press the RESET button until you hear one beep (after about two seconds), then release it. You will hear one more beep after you release the button.
This resets the NAS’s IP address and password to the default values.

Second RESET:

Press the RESET button until you hear two beeps. After the second beep, continue pressing the button
for around five more seconds, then release it. You will hear three quick beeps after you release the button.
This resets the NAS to the factory default configuration. All settings you have configured on the NAS,
including IP address, password, user accounts, groups, and so on will be reset to the factory defaults.

The reset process does NOT affect HDD settings, nor data stored on the NAS.

We recommend to periodically backup your configuration file to your computer.